| DE | EN | F
8030 GS3
Sliding gate motor valve
Type 8030
Sliding gate motor valve
product line GS3
(reinforced version)
size DN 15 - DN 250
pressure PN 10/40, PN100,
ANSI #150, #300, #600
This control valve is used in control circuits for neutral and aggressive media in the chemicals, process engineering and plant construction industries. The electric actuator means there is no need for any complicated and expensive compressed air supply. The force required is generated where it is needed. Actuator motors of differing sizes permit adaptation to the particular force requirement.
material
Stainless steel 1.4571 or 1.4581
Carbon steel 1.0570 or 1.0619

Media temperature up to 350 C
Special versions available on request.
connection
Intermediate flange version
actuator
Control actuators or 3-point actuators
Thrust 0.9 kN; 2 kN; 4.5 kN
Voltage 230 VAC, 24 VAC,
400 V, 24 VDC
Class of protection: IP 65
accessories
Metal bellows
Integrated positioner (positioner electronics)
Analog stroke feedback
Limit switch
data sheet
8030-GS3_-_data_sheet.pdf
8030-GS3_-_data_sheet.pdf 326 KB
modified 27.11.2017
open file | download file
data sheet USA
8030-GS3_-_data_sheet_-_US.pdf
8030-GS3_-_data_sheet_-_US.pdf 302 KB
modified 28.11.2017
open file | download file
Kvs values / Cv values
8001e.pdf
8001e.pdf 120 KB
modified 21.10.2014
open file | download file
manual
8030_-_Anleitung_-_Operating_Instructions_-_Manuel.pdf
8030_-_Anleitung_-_Operating_Instructions_-_Manuel.pdf 1791 KB
modified 04.12.2017
open file | download file
Search type: