| DE | EN | F
8030 GS1
Sliding gate motor valve
Type 8030
Sliding gate motor valve
product line GS1
size DN 15 - DN 150
pressure PN 10/40
This control valve is used in control circuits for neutral and aggressive media in the chemicals, process engineering and plant construction industries. The electric actuator means there is no need for any complicated and expensive compressed air supply. The force required is generated where it is needed. Actuator motors of differing sizes permit adaptation to the particular force requirement.
Stainless steel 1.4571 or 1.4581
Carbon steel 1.0570 or 1.0619

Media temperature up to 350C
Special versions available on request.
Intermediate flange version
Control actuators or 3-point actuators
Thrust 0.9 kN; 2 kN; 4.5 kN
Voltage 230 VAC, 24 VAC,
400 V, 24 VDC
Class of protection: IP 65
Metal bellows
Integrated positioner (positioner electronics)
Analog stroke feedback
Limit switch
data sheet
8030_-_data_sheet.pdf 308 KB
modified 16.05.2018
open file | download file
Kvs values / Cv values
8001e.pdf 120 KB
modified 21.10.2014
open file | download file
8030_-_Anleitung_-_Operating_Instructions_-_Manuel.pdf 1791 KB
modified 04.12.2017
open file | download file
Search type: